Stay away from black, As a general rule, I always stay away from black, especially solid black-although, it could work if is part of a color use with a particular molding and if it is not overpowering the drawing. It`s great to have something that has a range of values-including molding and mats, working as a set. Even with the values and gradations created within the graphite media, the mat or mats and the frame can all be selected to either compliment, subdue, or emphasize any particular value or aspect of your drawing.
Employment acid- gratuitous materials, Whatsoever matting, record or adhesive, barriers, or support that you utilisation in the framework of your artistic production or drawing should be completely acid free. Acidic materials, after long times of time could actually damage the artwork in the frame by distorting the actual paper or by turning the paper a yellowish color.
Use matting, I prefer using mats with the framing of my drawings. If an acidic matting is use, it can be backed by an acid-free material that will act as a territorial barrier between the matting and the drawing. There is a standard thickness that is necessary and preferred in the industry for this buffer or barrier. The same pondering can be given to the backing of your drawing. If your drawing or art is backed or mounted on an acid-free material, the barrier is unnecessary . Some framers use a foam-core board for backing.
The drawing should be cleaned well, removing smudges, dust, or eraser fragments. To see if there are any small fragments on your paper or drawing, you should look at the present itself trimly from a serious angle, so that you may see them contrasting from the paper`s ensue as they rise up. You should use a brush or compressed air to remove the fragments from the framing material.
It`s how your finished artwork is presented that makes all the difference. Although it`s tempting to merely area your drawing in a ready-made frame, there are several things that you can take in consideration before framing your artwork to insure it is adequately protected over the years.
Add a protective dust cover, After attaching the art and framing materials to the actual frame, a dust cover can be used on the back to keep additional dust, spiders, or bugs from entering the framed photograph compartment. This is usually done by using a two-sided tape on the back surface of the molding all the drive around the perimeter. Then a piece of brown-colored paper is laid down on the adhesive near as it is extended flat as you press it onto the adhesive crop up . You then trim the outer edges of the brown-colored paper to fit and then you are ready to attach your hanging wire, before placing your artwork on display.
Let your artwork breathe, In attaching the drawing to the backing or whatever secures its state within the mats or frame, it must only be secured at the top and allowed to hang if an adhesive or tape is used. It must not be secured firmly at all four corners or around its perimeter, because the humidity changes recurrently and the paper has to have freedom to flex, expand, and contract. Otherwise, the paper will ripple or develop productions if it is localized in any means rounds in the paper become very apparent when the lighting is directional or at an angle to the framed piece of art. The light causes highlight and shadow because of the contours in the paper. Some framers are using a large plastic photo type corner that allows the paper to slide in and be secure at all four corners and still allow for the flexing of the paper. It seems to be working quite well, as several of my drawings and illustrations using other media on paper, have been framed this lane for a number of years.
The glass must be wonderfully clean and must be tested for finger prints, dust, hair, or other strange material, before securing it permanently in the frame. You could have to do this more than once.
Forever physical body with glass, I would ever physical body with glass, but I would also drop the spare money for the UV shelter glass. However, I would never use non-glare glass or plexiglas.