Screen Shot 2015-06-10 at 4.09.13 PM
Pictures best pencil drawings of love drawings art gallery
The Layers panel showing the new Background copy layer.
Sketch pencil painting in flowers great drawing
Neu simple pencil drawing flower design bestseller
Couple 3d pencil sketch wallpaper pencil draw love images 3d image hd love pencil draw love

Under Town

|

Drowing Leave Photo Pencil Sketch.

The drawing should be cleaned well, removing smudges, dust, or eraser fragments. To see if there are any petite fragments on your paper or drawing, you can look at the eventuate neatly from a severe angle, so that you may notice them contrasting from the paper`s draw closer as they rise up. You may use a brush or compressed air to remove the fragments from the framing material.

Stay away from black, As a general rule, I always stay away from black, especially solid black-although, it can work if is part of a color oddity with a particular molding and if it is not overpowering the drawing. It`s good to have something that has a range of values-including molding and mats, working as a set. Even with the values and gradations created within the graphite media, the mat or mats and the frame may all be chosen to either compliment, subdue, or emphasize any particular value or aspect of your drawing.

Let your artwork breathe, In attaching the drawing to the backing or whatever secures its predicament within the mats or frame, it can only be secured at the top and allowed to hang if an adhesive or tape is used. It should not be secured firmly at all four corners or around its perimeter, because the humidity changes persistently and the paper has to have freedom to flex, expand, and contract. Otherwise, the paper will ripple or develop new drama series if it is confined in any road progressions in the paper become very obvious when the lighting is directional or at an angle to the framed piece of art. The light causes highlight and shadow because of the contours in the paper. Some framers are using a large plastic photo type corner that allows the paper to slide in and be secure at all four corners and still allow for the flexing of the paper. It seems to be working quite well, as numerous of my drawings and illustrations using other media on paper, have been framed this technique for a number of years.

Forever inning with glass, I would always soma with glass, merely I would also pass the spear carrier money for the UV safekeeping glass. However, I would never use non-glare glass or plexiglas.

Add a protective dust cover, After attaching the art and framing materials to the definite frame, a dust cover should be used on the back to keep supplementary dust, spiders, or bugs from entering the framed photograph compartment. This is usually done by using a two-sided tape on the back forge of the molding all the peculiarity around the perimeter. Then a piece of brown paper is laid down on the adhesive transpire as it is spreaded flat as you press it onto the adhesive come about . You then trim the outer edges of the brown paper to fit and then you are ready to attach your hanging wire, before placing your artwork on display.

It`s how your fulfilled artwork is presented that makes all the difference. Although it`s tempting to simply area your drawing in a ready-made frame, there are several things that you should take in consideration before framing your artwork to insure it is adequately safeguarded over the years.

The glass can be superbly clean and must be tested for finger prints, dust, hair, or other far-off material, before securing it lastingly in the frame. You can have to do this more than once.

Use matting, I prefer using mats with the framing of my drawings. If an acidic matting is use, it must be backed by an acid-free material that will act as a territorial barrier between the matting and the drawing. There is a standard thickness that is necessary and preferred in the industry for this buffer or barrier. The same meditation,brooding,mulling over,reverie,brown study,concentration,debate,speculation,rare cerebration can be given to the backing of your drawing. If your drawing or art is backed or mounted on an acid-free material, the barrier is unnecessary . Some framers use a foam-core board for backing.

Usage acid- free materials, Whatsoever matting, magnetic tape or adhesive, barriers, or funding that you use in the framing of your prowess or drawing must be fully acid free. Acidic materials, after long periods of time can actually damage the artwork in the frame by distorting the actual paper or by turning the paper a yellowish color.

Related Images of Drowing Leave Photo Pencil Sketch
New pencil sketch drawing love hug couple pencil sketch drawing
Pencil drawing love images beautiful pencil sketches of love vatoz atozdevelopment co
935x1024 beautiful pencil drawing of loving pics love pencil drawing photos love sketch pic
Easy love love pencil drawing pencil sketches of love easy love
Pencil sketches of couples in love cute couple hemant kandpals art
Love based flowers pencil drawings love flower pic in pencil drawing
Pencil drawing love images pencil drawing love hd photos pencil sketch love pencil drawing love
My heart bleeds pencil sketch by batmanzzz007 on clipart library
Cute love easy pencil drawings love pencil drawing nice easy drawings rhdrawingzorocom high quality sketch ofScreen Shot 2015-06-10 at 4.11.35 PMScreen Shot 2015-06-10 at 4.08.54 PM868x1136 pencil drawing and sketches drawing sketch pencil sketch sketches of couples inScreen Shot 2015-06-10 at 4.08.44 PMScreen Shot 2015-06-10 at 4.11.18 PMA black and white photo to sketch effect in Photoshop. Pencil drawing love pictures love based pencil drawing image pencil sketch images of love loveCute pencil drawings of love cute love pencil sketch cute loveSketch drawing image love pencil sketch drawing love pic cute pencil drawings drawn loveHow to draw couples in love pencil drawing tracingScreen Shot 2015-06-10 at 4.10.01 PMPencil sketches of love heart pencil drawing love sketch beautiful pencil drawingsPhotoshop photo to sketch effect, colorized with a gradient. Screen Shot 2015-06-10 at 4.10.14 PMBeautiful love birds drawingPhotoshop photo to sketch effect, single color. Easy pencil drawing love easy drawings in pencil of love easy pencil sketch drawing easypencil3pencil4Screen Shot 2015-06-10 at 4.10.56 PMBildresultat för neck line art work900x1274 easy pencil sketch drawing pencil sketch drawing love drawings in pencil sketch drawingImage 128666849 licensed and used by permission from Shutterstock.Cute love sketches cute pencil drawings of love free electronic wallpapers love fans shareLove pencil drawings pencil drawing love photo die in love pencil sketch love pencilsketchpencil2How to draw two parrots in love by pencil sketchLove pencil drawing at getdrawings com free for personal use love1024x1024 pencil sketch loving pictures love pencil drawing at getdrawings love images sketchThe Layers panel showing the photo on the Background layer. How to draw couple love scene with pencil sketch step by stepDragging the Background layer onto the New Layer icon. Photoshop photo to sketch effect, original colors. 1024x1409 love pencil sketch couple love sketches couple love pencil sketch love sketch images

Now that we’ve colorized the sketch with a gradient, what if you like one of the previous colorized versions better (the one using the photo’s original colors or the one using the single color)? Or, what if you don’t like any of the colorized versions and want to go back to the black and white version? How do you switch back?

Then, adjust the intensity of the colors if needed by lowering the layer’s opacity:

Changing the blend mode of the layer from Normal to Color Dodge.

Once you have your perfect pencil sketch, why not try adding some color for a nice variation.

The options and controls for the Levels adjustment layer appear in Photoshop’s Properties panel, but there’s nothing here that we need to do with them. Instead, to darken the sketch, all we need to do is change the blend mode for the Levels adjustment layer from Normal to Multiply:

… and sketch up your picture into a realistic drawing !… and quickly convert them to all the following formats:

The “Background copy 3” layer appears above the original Background layer.

With the “Color” layer now the top-most layer in the document, your original image will re-appear, blocking the other layers below it from view, which is obviously not what we want. We want to blend the color from the original image in with our sketch. To do that, simply change the blend mode of the “Color” layer from Normal to Color:

The effect after changing the Levels blend mode to Multiply.

I’ll be using Photoshop CC here, but the steps we’ll be covering are fully compatible with any recent version of Photoshop so you can easily follow along no matter which version you’re using. Photoshop CS6 users may wish to check out the previous Photo To Pencil Sketch With Photoshop CS6 tutorial, while users of Photoshop CS5 and earlier can follow along with our original Portrait Photo To Color Sketch tutorial. Note, though, that the steps for colorizing the sketch with a single color and a gradient were not covered previously and are new to this latest version of the tutorial.

After lowering the opacity, the overall brightness is now looking better:

Here’s the same sketch colorized with the photo’s original colors:

To convert the layer into a Smart Object, click on the small menu icon in the upper right corner of the Layers panel:

Release your mouse button when your hand cursor is directly over the New Layer icon. Photoshop makes a copy of the Background layer, names it “Background copy” and places it above the original:

  • Retouching
  • Basics
  • Text Effects
  • PDFs
  • Photo Effects
  • Digital Photo Essentials

We’ve created so many copies of our Background layer at this point that our Layers panel is becoming cluttered with them, and they all have names (“Background copy”, “Background copy 2”, “Background copy 3”) that don’t tell us anything about what the layer is being used for. Let’s break the cycle and rename the layer we just created.

Here’s the same sketch again, this time colorized with a single color (you can choose any color you like):

With your image newly opened in Photoshop, if you look in your Layers panel, you’ll see the image sitting on the Background layer, currently the only layer in the document:

Here’s how it will look as the initial black and white sketch:

Apply online a pencil sketch effect on a picturePencil Sketch drawingOnline Photo effects[ALL] ConvertImage ConvertImage

Next, we need to make a copy of our desaturated layer. Click on the Background copy layer in the Layers panel and, just as we did with the original Background layer, drag it down onto the New Layer icon:

To reduce the intensity of the color, simply lower the fill layer’s opacity, keeping an eye on the results as you drag the slider:

This opens the Gradient Fill dialog box. I covered everything you need to know about drawing and editing gradients in Photoshop in our How To Draw Gradients With The Gradient Tool and How To Use The Gradient Editor tutorials so I won’t go into detail here. Instead, let’s look at how to quickly select one of Photoshop’s preset gradients and how to apply it to our sketch.

© 2019 Photoshop Essentials.com.For inspiration, not duplication.Site design by Steve Patterson.Photoshop is a trademark of Adobe Systems Inc.

Here’s the image I’ll be using (stylish beauty portrait photo from Shutterstock):

Photoshop makes a copy of the layer, names it “Background copy 3” and places it directly above the original Background layer:

Photoshop adds a Levels adjustment layer, names it “Levels 1”, and places it above the other layers in the Layers panel:

Then choose Convert to Smart Object from the menu that appears:

In this first example, I added a solid color Fill adjustment layer. Change the blend mode to color, so only the color shows through. Adjust the opacity to suit your tastes.

We’re going to be using the “Background copy 3” layer to colorize our sketch, so let’s give it more descriptive name. To rename a layer, double-click directly on its name to highlight it:

Also try running a gradient through a new blank layer at the top and change that to color blend mode.

And now, the sketch appears colorized, in my case with blue:

If you like the way your sketch effect looks using the photo’s original colors, you can stop here. Otherwise, let’s look at a second way to colorize it, this time using a single color. Before we do, let’s turn off the “Color” layer by clicking its visibility icon (the “eyeball” icon) in the Layers panel. This will bring back the black and white version of the sketch:

I end up with an effect that looks more like the original photo. The exact radius value you choose will depend both on your image and the type of effect you’re going for, so the best thing to do is keep an eye on your image as you drag the Radius slider and judge the results. In my case, even though I like both versions, I think I like this second, more photo-realistic version a bit better, so I’ll go with this one. Click OK when you’re done to close out of the Gaussian Blur dialog box:

Premium content, celebrating the launch of PhotoshopCAFE online Academy

Turn a photo into a pencil sketch in Photoshop tutorialColin Smith

We have our main sketch effect, and we created it using a Gaussian Blur Smart Filter. As I mentioned earlier, Smart Filters remain fully editable, allowing us to easily go back and change the filter’s settings later if needed. How do we do that? Well, if we look again in the Layers panel, we now see the Gaussian Blur filter listed as a Smart Filter below the Smart Object we applied it to. If, at any point, you start thinking that your sketch could use a bit more fine-tuning, simply double-click directly on the words “Gaussian Blur” to re-open the Gaussian Blur dialog box and drag the Radius slider as needed:

Turning off the “Color” layer by clicking its visibility icon.

And now I’m back to my sketch being colorized with the photo’s original colors:

This opens the Gaussian Blur dialog box. To create our main sketch effect, all we need to do is apply some blurring to the layer (the Smart Object). We control the amount of blurring using the Radius slider along the bottom of the dialog box. The further we drag the slider towards the right, the more we increase the radius value and the stronger the blurring will appear.

Once you’ve chosen a color, click OK to close out of the Color Picker. Your document will temporarily be filled with that color, and if you look in the Layers panel, you’ll see the new fill layer, named “Color Fill 1”, sitting at the top.

Changing the blend mode of the Gradient Fill layer to Color.

If we look in the Layers panel, we see the Gradient fill layer (“Gradient Fill 1”) sitting at the top. Just as we’ve done a couple of times already, to blend the gradient in with the sketch, simply change the blend mode of the Gradient Fill layer from Normal to Color:

17 responses to “Turn a photo into a pencil sketch in Photoshop tutorial”

Learn how to easily turn any photo into a black and white pencil sketch with Photoshop, and then learn three great ways to colorize the sketch! Includes both the video and written versions of the tutorial.

Step 12: Move The “Color” Layer To The Top Of The Layer Stack

So how do we apply Gaussian Blur as a Smart Filter? For that, we first need to convert the layer to a Smart Object. Why do we need to convert it into a Smart Object? It’s because, when a filter is applied to a normal layer, it remains a normal, static filter. But when the exact same filter is applied to a Smart Object, it automatically becomes a Smart Filter!

  • All processed images are automatically deleted from our server 15 minutes after processing.
  • We do not publish nor keep any file anywhere.
  • We respect a total privacy while processing your file.

At this point, we have our main sketch effect, but currently it’s in black and white. Let’s look at a few different ways to colorize it. We’ll start by using the photo’s own original colors. For that, we need to make another copy of the Background layer, so click on the Background layer (the original Background layer that’s sitting below the other layers) and, just as we’ve done a couple of times already, drag it down onto the New Layer icon at the bottom of the Layers panel:

It may not seem like anything has happened, but if we look again in the Layers panel, we now see a small Smart Object icon in the lower right corner of the layer’s preview thumbnail. This tells us that the layer is now a Smart Object:

The Color blend mode tells Photoshop to blend only the color from this layer and ignore everything else, and just like that, the sketch is now colorized:

Here’s what my sketch looks like colorized with the Spectrum gradient:

This will turn the document completely white, or at least mostly white (you may see a few scattered areas of black depending on your image):

As soon as you select the Solid Color fill layer, Photoshop will pop open the Color Picker, asking you to choose your color. Don’t worry about choosing the wrong color here because, as we’ll see in a moment, we can easily come back and pick a different one. I’ll choose a shade of blue to see what that looks like:

To colorize the sketch with a single color, we’ll use one of Photoshop’s Solid Color fill layers. Click once again on the New Fill or Adjustment Layer icon at the bottom of the Layers panel:

If you want to try a different color, double-click on the fill layer’s color swatch in the Layers panel:

We need to invert the brightness levels in this layer, making light areas dark and dark areas light, and we can do that using Photoshop’s Invert command. Go up to the Image menu at the top of the screen, choose Adjustments, and then choose Invert (keyboard shortcut: Ctrl+I (Win) / Command+I (Mac)):

Combine this effect with the other ones available on the website (like the Sepia Effect), to obtain a unique photo !

Next, we need to change the blend mode of the layer. You’ll find the Blend Mode option in the upper left of the Layers panel. By default, the blend mode is set to Normal. Click on the word “Normal” to bring up a menu of other blend modes and choose Color Dodge from the list:

It’s easy. First, to hide the gradient, click on the Gradient Fill layer’s visibility icon in the Layers panel. With all three colorizing layers (the “Color” layer, the Solid Color fill layer and the Gradient Fill layer) now turned off, you’ll be back to your black and white version:

Next, we need to remove all of the color from our “Background copy” layer, and we can do that quickly using Photoshop’s Desaturate command. Go up to the Image menu in the Menu Bar along the top of the screen, choose Adjustments, and then choose Desaturate. You can also use the keyboard shortcut Shift+Ctrl+U (Win) / Shift+Command+U (Mac):

  • GIF
  • JPG
  • PCX
  • BMP
  • PNG
  • PDF
  • PSD
  • TIF

We’ve created our main sketch effect, but depending on how much blurring you applied, you may be finding that your sketch is looking too light. If that’s the case, we can easily darken it using a Levels adjustment layer. To add a Levels adjustment layer, click on the New Fill or Adjustment Layer icon at the bottom of the Layers panel:

How To Turn A Photo Into A Pencil Sketch With Photoshop Step 1: Duplicate The Background Layer

In this tutorial, we’ll learn how to easily create a classic Photoshop effect, turning a photo into a pencil sketch! In fact, we’ll actually learn how to create four variations of the sketch effect, starting with a simple black and white version. We’ll then take our black and white sketch and learn a few different ways to colorize it, first using the photo’s original colors, then with a single color, and then with a gradient!

Filter>Blur>Gaussian Blur (You could actually use any filter, as long as it creates a difference between the 2 layers)

If I increase the radius value to something much higher, maybe somewhere around 45 pixels:

Changing the blend mode of the adjustment layer to Multiply.

The Multiply blend mode is one of a group of blend modes in Photoshop that darken the image, and right away, we see that my sketch now appears much darker:

The more you lower the opacity value below its default 100%, the more the layers below the Levels adjustment layer will show through, brightening the sketch back up. I’ll lower mine down to around 40%, but keep an eye on your image as you adjust the opacity to find the value that works best:

Double-clicking the Gaussian Blur Smart Filter will re-open its dialog box.

With the name highlighted, type in the new name. Let’s name it “Color”. Press Enter (Win) / Return (Mac) on your keyboard when you’re done to accept the name change:

 Create a pencil sketch on a photo online, through ConvertImage !

Clicking the arrow to the right of the gradient color swatch.

We’ll also learn how to keep our pencil sketch flexible and editable, letting us go back and fine-tune things as needed, by taking advantage of Photoshop’s Smart Filters, fill and adjustment layers, and layer blend modes.

You have a famous pencil stroke ! Drawing and charcoal adepts will love the online pencil sketch drawing effect offered by ConvertImage !

To colorize the sketch with a gradient, we’ll use a Gradient fill layer. Click once again on the New Fill or Adjustment Layer icon at the bottom of the Layers panel:

5 Hidden but very useful features in Photoshop CC 2019. This tutorial shows the very useful new features that you…

This is one of out premium training courses, it’s $49.99 but for a very short time, you can get it for $7! No strings attached,  login and watch right now!(Grab it while you can).

To use this layer to colorize the sketch, we need to move it up to the top of the layer stack; in other words, move it above all the other layers. One way to do that would be to click on it and simply drag it up above the other layers, but there’s a faster way. To jump a layer directly to the top of the layer stack, first make sure it’s selected in the Layers panel. Then, press and hold Shift+Ctrl (Win) / Shift+Command (Mac) on your keyboard and press your right bracket key ( ] ). This will instantly jump the selected layer straight to the top:

It is now given to everyone to achieve real hand drawn sketches over any photography, and then turn it into a beautiful online stroke drawing.

  • GIF
  • XCF
  • PCX, RLE
  • CUR
  • JPG, JPEG, JPE
  • PDF
  • PICT, PCT, PIC
  • BMP, WBMP, DIB
  • PSD
  • PSB
  • TIF
  • PNG

Get all of our Photoshop tutorials as PDFs! Download them today!

What’s a Smart Filter, and how is it different from a normal filter? Well, Smart Filters are just like normal filters in Photoshop, only smarter! What makes them “smarter” is that while normal filters produce static results (that is, they make permanent changes to the pixels on a layer), Smart Filters are non-destructive and remain fully editable. They allow us to easily go back at any time and make changes to the filter’s settings without any loss of image quality. By applying Gaussian Blur as a Smart Filter, we’re giving ourselves the option to go back and fine-tune our sketch effect later rather than locking ourselves in with our initial filter settings.

Click OK to close out of the dialog box when you’re done. Your document will temporarily be filled with the gradient:

Either way desaturates the image, leaving us with a black and white version of our photo:

DJI Mavic vs GoPro Karma. What is the best drone? Side by side comparison, compare specs, price and what comes…

5 HIDDEN features in Photoshop CC 2019 you may have overlooked

Turn toBlack & WhiteTurn toSepiaDigital paintingMasterpieceVintageTV ScreenAndy Warhol online effectDisc SpotsEffectCharcoal penSketch drawingStereoscopic3D EffectMake 8 ID photos onlineOptimize Compress to JPEGRotate onlineCrop a pictureMirrorSymmetrizeScale & ResizeInsert text as a watermarkLogo / picture watermarkingMake an online Favicon.

icoConvert to another format

Photoshop Essentials.com – Tutorials and training for Adobe Photoshop.

And finally, here’s how the sketch will look after colorizing it with a gradient. At the end of the tutorial, we’ll see how to easily switch between all four versions so you can choose the one you like best:

This re-opens the Color Picker, allowing you to choose something different. I’ll try a pinkish-purple this time:

Please choose which format you want to convert your file toChoose the size of your icon :24x2432x3248x4864x64Standard Icon (16, 32, 48, 64)Please select which size you want your icon.Create a FAVICON.ICO (16×16) »

  •  Convert an image to PSD
  •  Convert an image to JPG
  •  Convert an image to TIF
  •  List of supported filetypes…
  •  Convert an image to PCX
  •  Convert an image to GIF
  •  Convert an image to BMP
  •  Convert an image to PDF
  •  Convert an image to ICO
  •  Convert an image to PNG

You will apply the Sketch Drawing effect to your picture in the next step, just after sending your file.» See an exampleINFORMATION :Depending on the size of your image, this effect can last between 15 seconds and 2 minutes.

This is perfectly normal 🙂

Change to Linear Dodge blend mode and you should see a perfectly white image (Use Color Dodge for sharper edges)

Start with a Photo that has some decent edge detail, here is one I got from Adobe Stock

Used in many illustrations, line drawing is a long and complex to learn graphical technique, so why not getting a little help ?

Here are some variations using Color Dodge, you will notice that Linear Dodge produces a softer result that Color Dodge. Try different blending Modes for different results.

To do that, click on the Background layer and drag it down onto the New Layer icon at the bottom of the Layers panel (second icon from the right):

The new “Background copy 2” layer appears at the top of the layer stack.

Dragging the “Background copy” layer onto the New Layer icon.

Back in the Gradient Fill dialog box, I’ll change the Angle of the gradient from its default 90° to 135°, which will cause it to run diagonally across the image, creating a bit more interest:

This Lightroom 6 / Lightroom CC tutorial will show you how to use the basic Adjustments in Lightroom Develop Module…

I’ll click OK to close out of the Color Picker, and now my sketch appears with my new color. You can go back and try as many different colors as you like until you find the one that works best:

All the CS6 information and more is available as a PDF magazine called the CS6 Superguide. If you’re on our list, you will receive it free by email as soon as it’s available. If not, sign up now and get the CS6 Superguide for free. Or click the image below.

If the color appears too strong, you can reduce it by lowering the opacity of the “Color” layer. I’ll lower mine down to 50%:

Thanks for checking out this tutorial. If you like these kinds of effects, check out my Photographic Effects video course, it’s 27 different effects like this and its only $7

This opens the Gradient Picker, showing us thumbnails of preset gradients we can choose from. To select a gradient, double-click on its thumbnail. This will both select the gradient and close the Gradient picker. For this tutorial, I’ll choose the Spectrum gradient (first thumbnail on the left, bottom row):

  • TIF
  • BMP, WBMP, DIB
  • PCX, RLE
  • XCF
  • JPG, JPEG, JPE
  • PNG
  • PDF
  • PICT, PCT, PIC
  • GIF
  • CUR
  • PSD
  • PSB

We’re going to need this original image again later when we go to colorize the sketch, which means we’ll need to make sure we don’t make any changes to it. To keep it safe, the first thing we’ll do is make a copy of the image by duplicating the Background layer.

Our online sketching tool works, simply ! Without complicated software or any plugin to install, and directly online. ConvertImage will carry out for you a beautiful pencil drawing effect, and can thus give a unique atmosphere to your photographs.

Changing the blend mode to Color Dodge turns the document temporarily white.

If you find, as I do, that your sketch now appears too dark, you can fine-tune the amount of darkening by adjusting the opacity of the Levels adjustment layer. You’ll find the Opacity option directly across from the blend mode option at the top of the Layers panel.

Then, to bring back the single color version, click on the Solid Color fill layer’s visibility icon (the empty square where the eyeball used to be) to turn it back on. Or, to bring back the photo’s original colors, click the “Color” layer’s visibility icon. I’ll turn my “Color” layer back on:

The effect you achieve will depend on how much blurring you’ve applied. Lower radius values will create a sketch with fine, thin lines, while larger values will give you a more photo-realistic result. For example, if I choose a fairly low radius value of around 10 pixels:

Then choose Solid Color from the top of the list that appears:

And there we have it! That’s how to easily turn a photo into a black and white pencil sketch, along with a few different ways to colorize it, in Photoshop! If you found this tutorial helpful, please consider supporting Photoshop Essentials by downloading the PDF version! Check out our Photo Effects section for more Photoshop effects tutorials!

As you can see, the effect itself is quite simple and there are a number of variations that you can try to get very different looking results. Add a comment at let me know how you are using this effect.

Now that we’ve converted the layer into a Smart Object, let’s apply the Gaussian Blur filter. Go up to the Filter menu in the Menu Bar along the top of the screen, choose Blur, and then choose Gaussian Blur:

Duplicate the layer by dragging into the new layer icon, or press Ctrl/Cmd+J

Let’s look at one more way to colorize the sketch, this time using a gradient. First, turn off the fill layer by clicking on its visibility icon in the Layers panel. This will once again return you to the black and white version of the sketch:

To choose a gradient, click on the small arrow to the right of the gradient color swatch at the top of the dialog box. Don’t click on the color swatch itself or you’ll open the Gradient Editor which is beyond the scope of this tutorial. Make sure you click on the arrow to the right of the color swatch:

Hi CAFE Crew, here is a brand new tut for you all. This is an old favorite of mine. How to turn a photo into a pencil sketch in photoshop. This is actually really easy to do and it gets quite good results too. As usual, I’ll provide a few creative jump off points at the end for your own experimentation.

We are excited to now offer our premium content as streaming video! We are committed to making our content available to you however you want it. To celebrate, we are offering Photoshop Secrets: Photographic Effects by Colin Smith, away for  a measly $7

When you release your mouse button, Photoshop makes a copy of the layer, names it “Background copy 2” and places it above the other layers:

In a moment, we’re going to create the main part of our sketch effect by blurring the layer using Photoshop’s Gaussian Blur filter. But rather than applying it as a normal filter, let’s apply Gaussian Blur as a Smart Filter.

  • Contact Us
  • YouTube Channel
  • Privacy Policy
  • Home
  • Member Login
  • Sitemap

To blend the color in with the sketch, simply change the fill layer’s blend mode from Normal to Color:

Amazon fireMatrix 4London Has FallenPewDiePieField Day 2020FFA CupBig W flash saleWhite Night MelbourneCheatEventsAFL newsHeart FoundationStrait of HormuzTom FeltonKatie HolmesFleetwood Mac BrisbaneA2M ASXA Thousand-Year Slumber Pokemon GOBen UnwinPell
Related Post of Drowing Leave Photo Pencil Sketch