E`er frame in with glass, I would always figure with glass, simply I would as well pass the supernumerary money for the UV protection glass. However, I would never use non-glare glass or plexiglas.
Let your artwork breathe, In attaching the drawing to the backing or whatever secures its circumstances within the mats or frame, it should only be secured at the top and allowed to hang if an adhesive or tape is used. It must not be secured seriously at all four corners or around its perimeter, because the humidity changes recurrently and the paper has to have freedom to flex, expand, and contract. Otherwise, the paper will ripple or develop soap operas if it is localized in any modus operandi productions in the paper become very apparent when the lighting is directional or at an angle to the framed piece of art. The light causes highlight and shadow because of the contours in the paper. Some framers are using a large plastic photo type corner that allows the paper to slide in and be secure at all four corners and still allow for the flexing of the paper. It seems to be working quite well, as numerous of my drawings and illustrations using other media on paper, have been framed this modus operandi for a number of years.
The drawing can be cleaned well, removing smudges, dust, or eraser fragments. To notice if there are any petite fragments on your paper or drawing, you can look at the take place closely from a terrible angle, so that you can notice them contrasting from the paper`s eventuate as they rise up. You may use a brush or compressed air to remove the fragments from the framing material.
Stay away from black, As a general rule, I always stay away from black, especially solid black-although, it can work if is part of a color route with a particular molding and if it is not overpowering the drawing. It`s great to have something that has a range of values-including molding and mats, working as a set. Even with the values and gradations created within the graphite media, the mat or mats and the frame should all be selected to either compliment, subdue, or emphasize any particular value or aspect of your drawing.
Add a protective dust cover, After attaching the art and framing materials to the definite frame, a dust cover should be used on the back to keep additional dust, spiders, or bugs from entering the framed picture compartment. This is usually done by using a two-sided tape on the back fall of the molding all the street around the perimeter. Then a piece of brown-colored paper is laid down on the adhesive move closer as it is reached flat as you press it onto the adhesive betide . You then trim the outer edges of the brown-colored paper to fit and then you are ready to attach your hanging wire, before placing your artwork on display.
Use acid- gratis materials, Whatsoever matting, record or adhesive, barriers, or championship that you use in the framework of your artwork or drawing can be totally acid free. Acidic materials, after long times of time can actually damage the artwork in the frame by distorting the definite paper or by turning the paper a yellowish color.
It`s how your finished artwork is presented that makes all the difference. Although it`s teasing to simply place your drawing in a ready-made frame, there are many things that you should take in rumination,cogitation before framing your artwork to insure it is adequately protected over the years.
Use matting, I prefer using mats with the framing of my drawings. If an acidic matting is use, it should be backed by an acid-free material that will act as a territorial barrier between the matting and the drawing. There is a standard thickness that is required and favored in the industry for this buffer or barrier. The same pondering can be given to the backing of your drawing. If your drawing or art is backed or mounted on an acid-free material, the barrier is avoidable . Some framers use a foam-core board for backing.
The glass can be wonderfully clean and can be tested for finger prints, dust, hair, or other strange material, before securing it permanently in the frame. You could have to do this more than once.
Related Images of How To Draw Dragonfly
. . . . . . . . . . . . . . . . . . .
Here are some interesting facts about the Dragonfly you might find interesting.
When you’re finished drawing your dragonfly, you can color it with any colors you like!
Draw a big, medium, and small circle on top of each other (like a skinny snowman).
Draw two bowl shapes in the head to create the eyes. Then draw the abdomen by making two long lines coming out of the bottom of the thorax, connected by a curve (it will look like a very long, skinny letter U).
Here you can learn step-by-step how to draw a top view of a dragonfly.
Ohh, good to know. But I had to make tiny antennae to complete the head of the dragonfly pendant I made :p I’ll have keep that in mind next time, Thanks!
Draw two legs coming out from under the top wings and two legs coming out from under the bottom wings.
Finally, you’re going to fill in the wings with smaller, almost scale-like segments.
Dragonflies do have antennae, but they’re very tiny (not very much bigger than the other hairs around its head). In most pictures of dragonflies, the antennae aren’t even noticeable unless it’s zoomed in very close. Dragonflies have incredible eyesight and don’t rely much on feeling and smelling with their antennae (like many other insects do).
Connect the ends of the top lines to the top circle to create the top wings. Connect the bottom lines to the bottom of the top wings (about a third away from the body).
Draw a curved line over the top of the body, touching both of the top wings. Next, draw a larger curved line over that one, connecting to the ends of the previous line, to create the head. On the very top, add a very small curved line.
Wow! i made a dragonfly pendant last week.. a quick question, don’t dragonflies have antenna?
Draw curved, horizontal lines going down the abdomen to give the appearance of segments.
This entry was posted in Step-by-Step and tagged Dragonfly on May 23, 2010 by maple.
In this drawing lesson we’ll show you how to draw a Dragonfly in 8 easy steps. This step by step lesson progressively builds upon each previous step until you get to the final rendering of the Dragonfly.
Here’s a short 36 second video on Drawing an Dragonfly step-by-step.
Step 8: Finalize the wings by adding the webbing details, this finishes the How To Draw a Dragonfly.
Starting about halfway down the middle oval, draw a long, upward curving line coming out of each side. Draw two more upward curving lines coming out of the bottom oval.
You could stop following the tutorial here and decorate the wings however you’d like (if you want them to have swirls or a more design-y look). To make more realistic wings, you will need to divide them into several segments. Start with round segments (as shown in the picture).
Even though dragonflies possess 6 legs, they are not capable of walking. Dragonflies are valuable predators that eat mosquitoes, and other small insects like flies, bees, ants, and butterflies. They are usually found around lakes, ponds, streams and wetlands because their nymphs are aquatic.
Dragonflies can be found all over the world, with more than 5,000 described species. The males of some of its species are territorial, defending their domain from other males who enter.