If you love RapidFireArt tutorials and want to support what I do, check out my Patreon page where you can support RFA and earn cool rewards at the same time!
Take a look at the different faces I made below using rough measurements!
From the center of each iris, draw a vertical line all the way down to Line 3. This will give us a boundary for the mouth.
Draw a vertical line down the center of each eye. This will mark the lips’ outer boundary. Click here for my lips tutorial. If you’ve already read it, place your triangle in the small box under the nose to start. If you drew the nose well above line 2, extend the triangle so the tip touches the nose.
On the face, mark the center line with 4 ticks spread equally apart. The eyes will sit roughly on this line. Don’t be afraid to move slightly above or below the line, since eyes are usually slanted. If you want to draw more mysterious manly eyes, click here.
Females tend to have shorter chins than their male counterparts, so a long chin can display a more masculine look.
And click here for a super detailed tutorial + video on how to draw a pair of realistic eyes.
Learn How to Draw a Realistic Face Step 1: Start with a circle
To draw the nose, extend the two lines at the inner corner of each eye all the way to Line 3. This will serve as a guideline for the nose’s width.
After you’ve grasped the drawing method above, try drawing faces without the ruler. Here are a few faces I created using rough measurements. Stretch your imagination and get comfortable with drawing faces quickly. How many faces can you draw in under 20 minutes?
Click the following link and hit the download button beside the printer icon to download the PDF: RapidFireArt Tutorials – How to Draw a Female Face
Click here if you want to learn how to draw realistic eyebrows
After cleaning those lines, I like to use a kneaded eraser to dab away dark spots from where the lines intersected with my drawing.
No Ruler Method: Without the ruler, I draw lines in this order: CENTER LINE, 2, 3, B, A, C (B is included because it’s easier to break the forehead section in half first, especially when you’re drawing freehand). This is the method I use to draw heads all the time.
In the image on the right, you can see that the eyebrows are drawn below Line C. For a surprised expression, the eyebrows will be pulled up closer to Line C.
To make it easy to digest, I split the tutorial up into 3 parts: How to draw a face from the front, side and 3/4 view. This is part 1 of 3. I came up with the original methods in these 3 tutorials by measuring over a dozen adult faces, so each tutorial carries over the same measuring techniques. Drawing faces should be easy as pie after you get the proportions down.
Extend the nose’s bridge past the eyelids to define the brow bone (this step is optional). These lines should be very light! Using a 4B pencil, draw the eyebrows along the brow bone. Facial features that can accentuate masculinity are thick bushy eyebrows!
When drawing hair on females, keep in mind that females generally have narrower and shorter foreheads compared to males. I drew the hairline for my character well below Line A and drew more hair at the sides of the temple, making sure not to bring the hair in too close to the eyebrow.
If you’ve already practiced my tutorial on drawing lips, place your triangle under the nose. The base of the triangle should be drawn inside the square. The top of the triangle should extend to wherever the bottom of the nose is.
Measure the length of the face and draw a ruler to the side of your drawing using a straight edge. Then divide it into 8 equal spaces length-wise.
Note: Remember to use a blunt HB pencil for these steps. I used a 4B so you can clearly see what I’m doing. Remember, the darker you go and the harder you press, the more difficult it will be to erase your under-layers/guidelines.
Finally, use a ruler to draw a faint line down the middle of the face vertically.
Click here to see the SIMPLE version of this tutorial. It’s a faster method and it’s also paired with a video!
There are 2 ways to do this step: Ruler or no ruler. I highly recommend using the ruler method for the first couple of faces you draw. Why? Because doing this step without it can throw your proportions off like crazy. Especially if you have trouble locating the ‘center’ of an object with your eyes. The no ruler method requires you to split multiple sections of the face in half and then in half again.
Extend the 2 lines where the inner corners of each eye are located. These guidelines will determine the nose’s width. Now that we have a box, it’s time to draw the nose. Click here to see my nose tutorial! Start with a circle, resting it anywhere between line 1 and 2. You can give your male character a more chiseled appearance by drawing the nose using very angular shapes.
As always, you don’t need to stick to the exact guidelines above. Learn how to draw heads using the basic guidelines and then mix and match facial features and face proportions.
Click here for my in-depth tutorial on how to draw eyebrows!
The CENTER LINE and Line 2 are general boundaries for the ears. You can learn how to draw realistic ears here.
This beginners’ step by step tutorial is for a basic male face. The proportions are different for females.
On the CENTER LINE, draw 4 ticks that separate the face into 5 equal spaces horizontally. If you’re like me and you drew a very narrow cheek/jaw line, you’ll want to take the full diameter of the circle into account (The two dotted lines mark the full diameter of the head).
Draw a circle and make a small horizontal line at the bottom for the chin. It’s position should be roughly half of the circle’s diameter vertically. This matters because the circle was drawn freehandedly, so the horizontal diameter could be different.
I like to do a final check before I erase all my guidelines. Check to see if the facial features need changing. Perhaps you’d like to change the nose length or eye shape.
If you’ve gone through this tutorial a few times already and want to try it without the ruler, draw your lines in this order: CENTER LINE, 2, 3 , B, A, C, essentially breaking sections of your drawing in half over and over again.
Label each of the ticks like the image on the left and once you’re done, use a ruler to carefully draw faint lines on the face through the ticks labelled: CENTER LINE, 2, 3, A and C.
Note: Remember to use an HB pencil with light pressure for all steps so you can easily erase your guidelines in the end. I used a lot of pressure in the examples so you can clearly see what I’m doing.
HB Pencil Ruler Sakura Electronic Eraser Kneaded Eraser Canson Recycled Sketch Paper
Draw the upper hairline somewhere in between line A and B. It’s up to you how large you want the forehead to be. To draw a receding hairline, go above line A. When you’re drawing a man’s face, bring in hair from the sides of the head to create a solid and visible looking hairline.
If you’ve already read my tutorial on drawing noses, place your circle above Line 2. I’m going to go with a short, narrow nose with a narrow bridge.
Click the following link and hit the download button beside the printer icon to download the PDF: RapidFireArt Tutorials – How to Draw a Face in 8 Steps
Another highly requested tutorial fresh out of the oven! This one is, again based off my original method, but with a few small changes here and there to create a female face with soft features. I’ll explain the differences in each step as we go along.
Super SIMPLE Method: If it’s still a little confusing, check out my simple method here. It’s also paired with a video so you can see how I do it!
After you’ve drawn the lips, you might feel the need to lengthen or shorten the chin so it’s more proportional to the rest of the face. This is completely normal. Happens to me all the time. That’s why it’s important to draw using faint lines so you can easily fix things.
Home Learn How to Draw Learn how to draw a face in 8 easy steps: Beginners
When you draw the eyes, keep in mind that females generally have wider, more open eyes than males. If you want to learn how to draw realistic eye shapes and how to size your irises properly, visit this tutorial.
Learn to draw unique faces by experimenting with various eye shapes, eyebrow angles, nose lengths/widths, etc… Grab a piece of paper and draw as many faces as possible!
Ruler Method: Make a ruler beside your drawing that is the same height. The ruler should be marked so there are 8 equal spaces. Always start with the center line. Draw faint lines through the face on the markings labelled CENTER LINE, 2, 3, A, and C. As you get used to this, you won’t need to draw the ruler on the side.
If you have an electric eraser, use it to quickly get rid of all the guidelines that run through your drawing. You can clean up certain dark spots or tight spaces with a kneaded eraser.
I know there are a lot of measurements in this tutorial, but I think it’s very important, especially if you’re a beginner. Once you understand proportions you can try this tutorial again without the ruler method.
Through this fun exercise, you will be able to draw faces faster with little effort, identify proportional errors when you revisit old drawings, identify what makes certain faces look more realistic than others, be able to draw cartoons, caricatures and more.
Once you’re happy with your results, use a hard eraser to clean up all the lines. An electric eraser works very well for this kind of work.
HB pencil Ruler Sakura electric eraser to quickly remove guidelines Prismacolor kneaded eraser Canson Recycled Sketch Paper
Many RFA readers have requested me to write a tutorial on how to draw faces, so here it is!
The picture on the left shows the top of the brow bone. I added this so you can see how the eyebrows are positioned naturally in regards to the bone structure.
The Center Line and Line 2 mark the general boundaries for each ear.
This tutorial is focused only on structure and proportions. If you want to learn how to shade a face, visit this page.
Draw a large circle and make a horizontal line below it for the chin. Then sketch the jawline. Draw a vertical line down the center of the face and make sure both sides of the face are symmetrical.
If this tutorial was helpful to you and you’d love to see more, share it with your friends. Your support will help me produce more quality, free tutorials!
I hope you guys enjoyed this tutorial on how to draw a face for beginners and found it easy to follow. If you have any questions or requests, leave it in the comments below and I’ll get back to you as soon as I can.
Remember to give the hair some volume by leaving lots of space between the head and the hair. For more detailed instructions on how to draw hair, visit this tutorial this tutorial.
When you’re done, draw the jawline to connect the circle to the chin. Females have all sorts of face shapes, but for this example I’m going to stick with a smooth, tapered jawline that’s less angular.