Use matting, I prefer using mats with the framing of my drawings. If an acidic matting is use, it should be backed by an acid-free material that will act as a territorial barrier between the matting and the drawing. There is a standard thickness that is required and favored in the industry for this buffer or barrier. The same reasoning should be given to the backing of your drawing. If your drawing or art is backed or mounted on an acid-free material, the barrier is unnecessary . Some framers use a foam-core board for backing.
Use acid- free materials, Whatsoever matting, record or adhesive, barriers, or mount that you employment in the framework of your fine art or drawing can be entirely acid free. Acidic materials, after long times of time can actually damage the artwork in the frame by distorting the actual paper or by turning the paper a yellowish color.
It`s how your fulfilled artwork is presented that makes all the difference. Although it`s tantalizing to merely place your drawing in a ready-made frame, there are numerous things that you must take in musing before framing your artwork to insure it is adequately fortified over the years.
The drawing can be cleaned well, removing smudges, dust, or eraser fragments. To see if there are any tiny fragments on your paper or drawing, you should look at the materialize neatly from a grave angle, so that you may notice them contrasting from the paper`s arise as they rise up. You could use a brush or compressed air to remove the fragments from the framing material.
Add a territorial dust cover, After attaching the art and framing materials to the definite frame, a dust cover should be used on the back to keep supplementary dust, spiders, or bugs from entering the framed picture compartment. This is usually done by using a two-sided tape on the back happen of the molding all the modus operandi around the perimeter. Then a piece of brown paper is laid down on the adhesive near as it is continued flat as you press it onto the adhesive crop up . You then trim the outer edges of the brown-colored paper to fit and then you are ready to attach your hanging wire, before placing your artwork on display.
Always skeleton with glass, I would e`er figure with glass, simply I would likewise pass the supernumerary money for the UV safety glass. However, I would never use non-glare glass or plexiglas.
Let your artwork breathe, In attaching the drawing to the backing or whatever secures its situation within the mats or frame, it should only be secured at the top and allowed to hang if an adhesive or tape is used. It can not be secured firmly at all four corners or around its perimeter, because the humidity changes chronically and the paper has to have liberty to flex, expand, and contract. Otherwise, the paper will ripple or develop soap operas if it is confined in any method outbreaks in the paper become extremely apparent when the lighting is directional or at an angle to the framed piece of art. The light causes highlight and shadow because of the contours in the paper. Some framers are using a large plastic photo type corner that allows the paper to slide in and be secure at all four corners and still allow for the flexing of the paper. It seems to be working quite well, as many of my drawings and illustrations using other media on paper, have been framed this technique for a number of years.
Stay away from black, As a general rule, I always stay away from black, especially solid black-although, it can work if is part of a color manner with a particular molding and if it is not overpowering the drawing. It`s good to have something that has a range of values-including molding and mats, working as a set. Even with the values and gradations created within the graphite media, the mat or mats and the frame may all be chosen to either compliment, subdue, or emphasize any particular value or aspect of your drawing.
The glass must be tremendously clean and must be tested for finger prints, dust, hair, or other foreign material, before securing it permanently in the frame. You can have to do this more than once.
Related Images of How To Draw Rabbit Step By Step
. . . . . . . . . . . . . . . . . . .
Step 2: Add an eye, two big long ears at the top of the head and a tiny nose.
Make sure you also check out any of the hundreds of drawing tutorials grouped by category.
Below are the individual steps – you can click on each one for a High Resolution printable PDF version.
Step 1: Draw the head. Think of drawing a backwards “C” with a little bump in the middle.
Envato Market has a range of items for sale to help get you started.
Please PAUSE the “How to Draw a Rabbit” video after each step to draw at your own pace. For the first few steps, don’t press down too hard with your pencil. Use light, smooth strokes to begin. Step 1: Draw a slanted oval as a guide for the rabbit’s body.
Step 2: Draw a shape similar to an egg above the body as a guide for the rabbit’s head. Step 3: Inside the head, draw two intersecting lines. These will be guides to help you place the rabbit’s facial features later on.
Step 4: Draw two long arcs on top of the head for the rabbit’s ears. Step 5: Draw three lines under the body as guides for the rabbit’s feet.
Step 4: Next draw the front leg on the bottom. It almost lines up under the ears.
Step 5: Draw the rump and hind leg. Start the curve for the big hind leg almost at the back. Make the back foot flat along the bottom.
Rabbits and hares have a reputation of being tricky, because they are so good at out-smarting predators. They’ve been popular in folklore and mythology. There are many popular fictional characters, such as the Easter Bunny, Bugs Bunny and Roger Rabbit, just to name a few.
Step 6: Add a round, fluffy tail at the back and another front leg.
Rabbits move very rapidly, due to their long hind legs and shorter front legs. They live in a wide array of habitats from desert to swampland, mountains, forests – and even cities!
Step 3: Using big round curves draw the back and neck. Draw a smaller curve for the neck under the chin.
The images above represents how your finished drawing is going to look and the steps involved.
At the bottom you can read some interesting facts about the Rabbit.
The soles of a rabbit’s feet are hairy, which improves its running grip. Baby rabbits are called “kits,” born naked and blind, while hare babies are called “leverets,” born with fur and open eyes.
Some rabbit’s ears can be over 4” long and provide them with excellent hearing for detecting predators. With the exception of the cottontail rabbits, rabbits live underground in burrows, while hares live above ground in simple nests.
Hares have not been domesticated, while rabbits are kept as pets and raised for their meat. Pet rabbits are very social and can make friends easily with other rabbits, guinea pigs, birds and; happily for us, humans!
In this quick tutorial you’ll learn how to draw a Rabbit in 6 easy steps – great for kids and novice artists.
Rabbits belong to the Leporidae family of mammals, along with hares. The oldest known species of rabbits lived 34 – 56 million years ago.