With a 4B pencil draw spokes going outward from the pupil. Overlap some of the spokes to create thicker lines. This will make the eye look more interesting. Leave some areas untouched as they will be filled in later.
I’ve added some eyelash reflections, some subtle blood vessels as well as darkened the overall drawing. Try to use as many shades as possible when drawing eyes. Most people are afraid to go dark. Look at the picture in step 8 and compare it to the last step. Going dark makes a huge difference! I used to stop at step 8 too, because I was afraid I wouldn’t be able to erase if my hard work turned into a complete disaster. This fear left me unsatisfied with all my drawings because they lacked depth. So take it a step further and make use of your softer pencils!
So tell me… was that an easy eye drawing tutorial? Or does it need some improvement? Your feedback would be greatly appreciated 🙂
I hope you enjoyed this simple step by step tutorial on how to draw a realistic eye with pencil.If you have any questions or requests, let me know in the comments below!
On the previous step we added highlights going straight down, here you will add highlights with kneaded eraser in an angle. You’ll be making “W” shaped highlights, just make enough that it will give the iris some texture. After making these highlights, you will add shadows, under some of these highlights. In the image above you can see a very clear “W”, below that you can see a darker area, this will be the shadow for this highlight. Add these shadows to some of the highlights around the iris, not all of them, make it as random as possible. Using your color blender, blend the ends of the these highlights so they don’t look like white lines. In this step we will also start working on the sclera, which is the white part of the eye. The tip of the color blender should still have some graphite, so use that to put down some graphite around the sclera like the image above. The two circles that you see on the right side will be highlights that will suggest wetness.
Using a 6B pencil, fill in the pupil. Avoid pressing too hard or else it will be hard for you to erase if you need to make corrections later on. You can go over the area again to achieve a darker shade. Make sure the highlights stay clean!
Well we will start by drawing the outline, this can be a fast sketch, but enough detail to show the shape. I used 2b 0.5mm mechanical pencil. Make sure you don’t make the outline too dark or else you will have an outline in the end. The three round circles close to the pupil will be light source reflections.
The eyelashes are added, take a look at the angle that they are drawn, they are not drawn straight down,except for the ones in the center. These are drawn last because they are on top of the of the other features. Using your kneaded eraser you can add some highlights,which would be some hairs reflecting some light. You can play around with them to get a much realism. Just make sure you make sure to curve them, they are not straight. The ones in the center don’t have much of a curve because you’re looking straight at them.
Want to improve your shading skills? Click here to read my shading tutorial!
If you’re stuck on drawing a realistic eye shape, iris or eyebrow, visit the 3 pages below:
If you’re enjoying this article, click here for another realistic eye tutorial!
Hi, welcome to RapidFireArt! My name is Darlene and in this tutorial I’m going to teach you how to draw a realistic eye using easy step by step instructions. This is my first tutorial, so I hope you enjoy it!
Share your results with others and get feedback from other members by posting your images here, Drawing Results
drawingfeaturedhow to draw eyeshuman eyepencilrealistic eyesTutorials Post navigation
Click here for a super detailed tutorial on how to draw eyelashes
Click the following link and hit the download button beside the printer icon to download the PDF: RapidFireArt Tutorials – How to Draw a Realistic Eye
Using your kneaded eraser add some highlights around the outer iris. These highlights will be larger than the ones in the center. You can also make some that start from the outer edge of the pupil to the end of the iris, but don’t make too many of these.
Start by filling in the pupil using the 6b progresso pencil. Make sure not to press too hard or else you will not be able to erase it easily if you need to. One good way to get really darks is to layer it. Start off by lightly going over with with the progresso pencil and then use the the color blender to blend it. Add another layer of pencil with progresso and do the same with blender. Keep on doing this until you are satisfied with it.
On a separate sheet of paper, smear some graphite into a small area. Use the blender to rub the area until the graphite has transferred to the tip of the blender (learn how to use a blending stump here). You will now use that to fill in the outer area of the pupil. This step does not have to be done perfectly. Sloppy smudging will make it turn out better, as well as give the eye more depth.
For this tutorial on drawing a realistic eye, I will be using the following tools: – Mechanical Pencil with 0.5 mm HB and 4B Ain Leads – Derwent Graphic 6B Pencil – Kneaded Eraser – Blending Stump (Learn how to use them here) – Smooth Bristol Paper
Using your mechanical pencil lightly fill in the area around the pupil. Then with with the blender blend from the center of the pupil out. This will also pull some darks from the center of the pupil, giving that area some shadows.
Take a look at the pupil(the black area in the center), this area contracts in size when light hits it. The area around the pupil is the iris, this is the area that gives us our eye color. As you can see its not just a blotch of brown, its made up highlights and shadows and this is what we will concentrate on. Adding the right shadows and highlights gives they eye depth and life. All eyes are different and you will see that adding different highlights in different areas gives different effects. The white dot close to the eye is the reflection of light source, it can be big or large, it depends if the person is indoor or outdoor. Another thing you must take into consideration is the shape of the eye. The surface of the eye is not flat, it has a curve to it. So taking that into consideration when drawing highlights will give the eye much more dimension. These are the tools that i used
Similar Tutorial…You can also try Drawing Realistic Tiger Eye With Pencil Step 7
Use the 6B pencil to create a shadow under the eye lid to give the eye more depth and roundness.
I hope this tutorial was helpful in improving your artwork. If it was, be sure to show support by sharing it with social media below. It would be greatly appreciated! Thank you for the amazing response!!
Use the blending stump to fill the white space in the iris. Carefully work around the highlight. Don’t press too hard. You should still be able to see the lines coming out of the pupil when done. If most of the lines have disappeared, you have either used the blender with too much force, or have not pressed hard enough when creating the spokes.
We will add now the lower eyelashes, these should be a bit lighter so you can use a 2h pencil to draw them or use the mechanical pencil and then use an edged kneaded eraser to tap along the hair to remove some graphite. Like the top eyelashes, the center ones curve down and you go either left or right so you start to see the curve on the hair.
Fill in the eyebrows as well as the eyelashes. Eyelashes should be drawn using curved lines, NOT straight lines. To create the eyebrows, use a thin HB pencil. For the eyelashes, go with something darker, like a 6B. Go over the drawing and darken areas such as the pupil, creases, shadows and clean the highlights to make your drawing POP!
Using your mechanical pencil draw the lines that you see around the area that was shaded previously, try to make them quick and light. If they are random, it would be much better. These lines will serve as a guide of highlights and shadows that the iris has. From the reference picture of the eye above, you can see that the iris is full of highlights and shadows.
Using your progresso pencil draw out that shape that you see on the image above, it doesn’t have to look exactly, but it should be random. Don’t draw the outline too dark, just enough for you to see it. Darken the area below that outline, don’t make it too dark that it will stand out too much from the rest of the iris. Blend it just a bit in some areas so that it blends a bit into the rest of the iris.
Here we will darken the iris. Before we do that we will add some eyelash reflections, you don’t have to add this to all your drawings, but if the drawing is big enough you can. Over the 3 glare spots you can draw some eyelash reflections. The reflection from eyelashes would be reflected on the surface of the eye, since the glare spots are at the top and are white you can draw over them the tips of the eyelashes. Once you have done this, you lightly put down a layer with the 2h pencil over the whole iris. This will darken the highlights, darken the top section of the iris a bit more because this part will be a bit more darker because of shadows of the top of the eye and eyelashes. I added some other details like the reflections on the corner of the eyes. With the 2h pencil i also added some light blood vessels that run out from the corners of the eye. These little details make a big difference in drawing a realistic eye. Look at the reference photo at the beginning so you can see those blood vessels. Darken the sclera, the white part of the eye a bit with the blender, especially the corners. This will give the eye more depth and realism with the subtle blood vessels.
If you love RapidFireArt tutorials and want to support what I do, check out my Patreon page where you can support RFA and earn cool rewards at the same time!
Draw around the whole iris with the 4b progresso pencil, don’t press too hard. This will outline the whole iris. Take your kneaded eraser between your index finger and your thumb then squeeze. This will give the kneaded eraser a fine edge. You will use this to pull some highlight from the area outside of the pupil. Make the highlights going around the area, don’t add too many, just enough that they stand out. If you pull too much graphite, just add more with the pencil, blend it with blender and use kneaded eraser again. You will probably need to make new edge on eraser after each time you pull graphite because it will stick to the edge. If you don’t, next time you try to make a highlight it will not pull as much graphite. These little erasers are amazing and all pencil artists should have them in their tools.
How to draw realistic eyes from SCRATCH! How to draw 6 different eye shapes How to draw eyebrows Step 2: Shade the Pupil
Taking your mechanical pencil, darken the shadows around the edge of the iris. Add some dark lines in between some of the highlights for so the highlights can jump out more. In this step you can also experiment with highlights, add more or take away. We now have the basic design for the iris, from here on we can start to darken the whole iris by adding light layers of graphite using 2h pencil. If you’re drawing and eye that is blue, green or light in color, you would leave it like this. We also shaded the fold thats under the eyebrow and above the eyelash. Using your kneaded eraser you can erase between the glare spots to blend them together.
Shade the eye whites as well as the skin around the eyes. Don’t leave the eyeball white or else it will appear unrealistic and lack depth. For a more detailed tutorial on shading eye whites and how to make eyeballs look round, click here.
Using your blender pull from the edge of the inner area outside. This will give a nice pattern and will be a guide for the highlights and shadows on the outer area. Make sure you don’t shade the highlights or else you will lose them. You can always erase those areas after so they wont be as bright. You can now begin to see the eye come to life, layering is a big part of pencil drawing and learning what goes on top and bottom is very important. It might take a while to go through all these steps, but the time pays off in the end. After practicing, it will become much easier with each one.
Take your 4b progresso pencil and put down some graphite on a separate piece of paper. Get it as dark as possible, then with your color blender lightly rub that area. Now if you look at the tip of blender you will see that it has some graphite. Now rub the area around the the wobbly circle. If you don’t a have a color blender you can use a tortillon/shading stump. I would recommend that you have both of these tools, they can be helpful in achieving different effects.
Let’s start off with an HB pencil to sketch the shape of the eye. This outline should not be too dark because you want to prevent it from showing through in the end. We just need the basic shapes outlined at this point. The square shape in the pupil is a glare from a window or similar shaped light source. You can use other shapes such as circles or ovals as well.
We can all probably draw the human eye, we draw the oval shape with the iris and pupil. I consider that to be a basic sketch of the eye. Before you draw a realistic eye you must first study what it really is. I will post a closeup picture of an eye so you can see what it looks up close. We all have them, but I’m sure that most of us haven’t really paid attention to what it really looks like up close. If you really want to draw a realistic eye, i suggest you study it well. This goes for any other object or feature. I’ll show the techniques that i use but it will be much easier if you understand what you are drawing. Well here it is.
Darken the creases using a 4B pencil. Use the kneaded eraser to make the highlights pop, as well as dab areas of the eye that need to be lightened. For example the eye whites, lower lash area, brow bone and the inner corner of the eye near the tear duct.
UPDATE: For a while now, you guys have requested a tutorial on drawing a pair of eyes. Here it is, along with a super in-depth tutorial as well!
This is the final drawing of what we’ll be working on. I’ll try to give a detailed explanation of the whole process that i use. Again, study the picture above to get an idea of what you’ll be drawing. It will make much more easier and with time you will understand how to take the same steps yourself. With the same process try to draw the eye above so that you can practice.
This tutorial should be only the first step, one thing i can tell you is that the more you draw the better you will get. I won’t stop reminding that you should study whatever you’re drawing. Understanding what you are drawing is so helpful and the end results will show the preparation. Hopefully this tutorial was helpful, if you have any problems or have any questions, leave a comment or contact me.
The area outside of the iris layered under the rest of the iris, adding these shadows gives the iris much more depth. Lightly draw them under and blend them with the rest of the dark area. You don’t have to put shadows all the way around, just on random areas.
Now blend the area that you outlined on the previous step. If its not dark enough just put down more pencil and blend it, it should look like the image above. On the previous step we pulled out some highlights with the kneaded eraser. Now randomly darken between some of those highlights using your mechanical pencil. This will bring out some of the highlights much more and will also add some shadows. Outline the edges of that area, this will make it stand out. Using your blender blend the edge of the pupil with the area outside. Don’t blend it too much, just enough so the end of the highlights blend out nicely.
Well that is about it, it might seem long but with time you will be drawing them with ease. Don’t worry if the first time it doesn’t come out right, keep practicing and you will see results. The more you draw it, the more you will understand each step and it will become much easier. Don’t be scared to experiment, study the reference eye and look at the features. Using the same tools that were used try different ways to put down those details. Be creative with the process, before you know it you’ll your eyes will be glistening and staring at you :).