Stay away from black, As a general rule, I always stay away from black, especially solid black-although, it should work if is part of a color procedure with a particular molding and if it is not overpowering the drawing. It`s great to have something that has a range of values-including molding and mats, working as a set. Even with the values and gradations created within the graphite media, the mat or mats and the frame may all be selected to either compliment, subdue, or emphasize any particular value or aspect of your drawing.
Use matting, I prefer using mats with the framing of my drawings. If an acidic matting is use, it can be backed by an acid-free material that will act as a protective barrier between the matting and the drawing. There is a standard thickness that is compulsory and favored in the industry for this buffer or barrier. The same pondering should be given to the backing of your drawing. If your drawing or art is backed or mounted on an acid-free material, the barrier is unnecessary . Some framers use a foam-core board for backing.
Let your artwork breathe, In attaching the drawing to the backing or whatever secures its position within the mats or frame, it should only be secured at the top and allowed to hang if an adhesive or tape is used. It must not be secured gravely at all four corners or around its perimeter, because the humidity changes continually and the paper has to have liberty to flex, expand, and contract. Otherwise, the paper will ripple or develop sets if it is contained in any strategy sets in the paper become very apparent when the lighting is directional or at an angle to the framed piece of art. The light causes highlight and shadow because of the contours in the paper. Some framers are using a large synthetic photo type corner that allows the paper to slide in and be secure at all four corners and still allow for the flexing of the paper. It seems to be working quite well, as several of my drawings and illustrations using other media on paper, have been framed this means for a number of years.
The glass should be superbly clean and can be tested for finger prints, dust, hair, or other far-off material, before securing it permanently in the frame. You may have to do this more than once.
Employment acid- free materials, Whatsoever matting, taping or adhesive, barriers, or backing that you utilization in the framework of your artistic production or drawing must be entirely acid free. Acidic materials, after long times of time may actually damage the artwork in the frame by distorting the definite paper or by turning the paper a yellowish color.
The drawing must be cleaned well, removing smudges, dust, or eraser fragments. To see if there are any petite fragments on your paper or drawing, you can look at the forge trimly from a harsh angle, so that you can see them contrasting from the paper`s arrive as they rise up. You may use a brush or compressed air to remove the fragments from the framing material.
It`s how your finished artwork is presented that makes all the difference. Although it`s teasing to purely area your drawing in a ready-made frame, there are many things that you can take in meditation,brooding,mulling over,reverie,brown study,concentration,debate,speculation,rare cerebration before framing your artwork to insure it is adequately protected over the years.
Add a territorial dust cover, After attaching the art and framing materials to the definite frame, a dust cover must be used on the back to keep additional dust, spiders, or bugs from entering the framed picture compartment. This is usually done by using a two-sided tape on the back draw near of the molding all the scheme around the perimeter. Then a piece of brown-colored paper is laid down on the adhesive present itself as it is spreaded flat as you press it onto the adhesive fall . You then trim the outer edges of the brown-colored paper to fit and then you are ready to attach your hanging wire, before placing your artwork on display.
E`er anatomy with glass, I would e`er border with glass, merely I would too pass the superfluous money for the UV safety glass. However, I would never use non-glare glass or plexiglas.