Use matting, I prefer using mats with the framing of my drawings. If an acidic matting is use, it can be backed by an acid-free material that will act as a protective barrier between the matting and the drawing. There is a standard thickness that is required and preferred in the industry for this buffer or barrier. The same pondering should be given to the backing of your drawing. If your drawing or art is backed or mounted on an acid-free material, the barrier is avoidable . Some framers use a foam-core board for backing.
E`er physical body with glass, I would forever frame with glass, merely I would likewise pass the extra money for the UV shelter glass. However, I would never use non-glare glass or plexiglas.
It`s how your completed artwork is presented that makes all the difference. Although it`s tantalizing to simply area your drawing in a ready-made frame, there are many things that you can take in thinking before framing your artwork to insure it is adequately fortified over the years.
The glass can be wonderfully clean and should be tested for finger prints, dust, hair, or other strange material, before securing it lastingly in the frame. You can have to do this more than once.
Let your artwork breathe, In attaching the drawing to the backing or whatever secures its bad way within the mats or frame, it must only be secured at the top and allowed to hang if an adhesive or tape is used. It should not be secured firmly at all four corners or around its perimeter, because the humidity changes recurrently and the paper has to have liberty to flex, expand, and contract. Otherwise, the paper will ripple or develop series if it is restricted in any procedure arrangements in the paper become very apparent when the lighting is directional or at an angle to the framed piece of art. The light causes highlight and shadow because of the contours in the paper. Some framers are using a large synthetic photo type corner that allows the paper to slide in and be secure at all four corners and still allow for the flexing of the paper. It seems to be working quite well, as many of my drawings and illustrations using other media on paper, have been framed this pathway for a number of years.
Use acid- costless materials, Whatever matting, tapeline or adhesive, barriers, or financial backing that you use in the frame of your nontextual matter or drawing should be wholly acid free. Acidic materials, after long times of time can actually damage the artwork in the frame by distorting the definite paper or by turning the paper a yellowish color.
The drawing must be cleaned well, removing smudges, dust, or eraser fragments. To notice if there are any tiny fragments on your paper or drawing, you must look at the draw close trimly from a severe angle, so that you could notice them contrasting from the paper`s draw near as they rise up. You can use a brush or compacted air to remove the fragments from the framing material.
Stay away from black, As a general rule, I always stay away from black, especially solid black-although, it could work if is part of a color wont with a particular molding and if it is not overpowering the drawing. It`s good to have something that has a range of values-including molding and mats, working as a set. Even with the values and gradations created within the graphite media, the mat or mats and the frame may all be chosen to either compliment, subdue, or emphasize any particular value or aspect of your drawing.
Add a protective dust cover, After attaching the art and framing materials to the actual frame, a dust cover should be used on the back to keep additional dust, spiders, or bugs from entering the framed photograph compartment. This is usually done by using a two-sided tape on the back near of the molding all the process around the perimeter. Then a piece of brown paper is laid down on the adhesive draw nearer as it is came as far as flat as you press it onto the adhesive near . You then trim the outer edges of the brown paper to fit and then you are ready to attach your hanging wire, before placing your artwork on display.